The smash burger is the simplest burger in American cooking, and also one of the best. Instead of a thick, neat patty, you press a ball of ground beef flat against a screaming-hot pan, and the edges turn lacy, brown, and crisp. The center stays juicy, the cheese melts into every crack, and the whole thing comes together in about ten minutes. It is the burger that diners and smash burger joints built their names on, and it is easy to make at home.
The science is simple. Pressing the meat thin against hot metal creates maximum contact, and maximum contact means maximum browning. That browning is where the flavor lives. A thick patty steams in its own juices; a smashed patty sears, and the seared edges taste like the best part of a grilled burger in every bite.
You need a heavy skillet, preferably cast iron, a sturdy spatula, and ground beef with enough fat to stay juicy. Everything else is optional. This recipe makes four burgers, and from the moment the pan is hot, each patty takes about four minutes.
Why This Recipe Works
A smash burger works because of heat, fat, and contact. The pan must be very hot, the beef must be at least 20 percent fat, and the smash must be firm and even. Get those three things right and the burger practically makes itself.
- Smashing the patty thin creates lacy, crispy edges with deep brown flavor.
- 80/20 ground beef has enough fat to stay juicy even when smashed thin.
- A cast iron skillet holds heat better than any other pan, so the sear is fast and even.
- Thin patties cook in about two minutes per side, so dinner is ready in minutes.
- Two thin patties stack better than one thick one, with more crispy surface in every bite.
Ingredients
- 1 pound 80/20 ground beef, cold from the refrigerator
- 1 teaspoon salt
- 1/2 teaspoon black pepper
- 1/2 teaspoon garlic powder
- 4 slices American cheese
- 4 potato buns or brioche buns
- 1 tablespoon butter
- 1 tablespoon vegetable oil
- 1 small onion, thinly sliced (optional)
- Dill pickle chips, for serving
- Lettuce and tomato slices, for serving
- Burger sauce, ketchup, or mustard, for serving
Instructions
- Divide the beef. Divide the cold ground beef into four equal portions, about 4 ounces each, and roll each one gently into a loose ball. Do not pack the meat tightly or overwork it, or the patties will turn tough. Keep the balls cold in the refrigerator until the pan is ready.
- Heat the pan. Place a large cast iron skillet over high heat for 3 to 4 minutes, until it is very hot. Add the vegetable oil and let it shimmer. The pan should be hot enough that a drop of water sizzles and evaporates instantly.
- Smash the first patties. Place two beef balls in the hot skillet, leaving space between them. Using a heavy spatula, press each ball down firmly and evenly until it is about 1/4 inch thick. Press straight down and hold for a few seconds. If you have a second spatula, use it to press on top of the first for extra force. Work quickly so both patties start cooking at the same time.
- Season and sear. Season the smashed patties with salt, black pepper, and garlic powder. Let them cook undisturbed for 2 to 3 minutes. Do not press them again and do not move them. The edges will turn brown and lacy, and the top will start to look cooked around the edges.
- Flip and add cheese. Scrape under each patty with the spatula, keeping all the crispy bits attached, and flip it over. Immediately place a slice of cheese on top. Cook for 1 to 2 minutes more, until the cheese melts and the second side is browned.
- Repeat. Transfer the finished patties to a plate and repeat with the remaining two beef balls. If you want a double smash burger, cook all four patties and stack two per bun.
- Toast the buns. Melt the butter in a clean skillet over medium heat and toast the buns cut side down for 1 to 2 minutes, until golden.
- Build the burgers. Spread sauce on the bottom bun, add pickles, lettuce, and tomato if you like, then the hot patty or patties, then the top bun. Serve right away while the edges are still crisp.
Tips for the Best Results
- Keep the beef cold until the moment it hits the pan. Cold fat renders more slowly, which keeps the patty juicy.
- Use a heavy, flat spatula. A thin, flexible spatula will bend and will not smash the meat evenly. A burger press works too.
- Do not press the patty after the first smash. Pressing cooked meat squeezes out the juices and dries out the burger.
- Scrape, do not lift, when flipping. The crispy brown bits stuck to the pan are the best part, and scraping keeps them on the patty.
- Season after smashing, not before. Salt mixed into the meat before cooking can draw out moisture and make the patty dense.
- Work in batches of two. Four patties in one pan crowd the surface, drop the temperature, and steam instead of sear.
Variations to Try
- Double smash: Use two thin patties per bun with cheese between them for a taller, juicier burger.
- Onion smash: Pile thinly sliced onions on top of each beef ball before smashing, so the onions cook into the patty.
- Bacon cheeseburger: Add two strips of crispy bacon and a slice of cheddar on top of the patty.
- Spicy: Add sliced jalapenos and pepper jack cheese, and spread a spicy burger sauce on the bun.
- Mushroom Swiss: Top the patty with sauteed mushrooms and Swiss cheese for a classic diner combination.
- Turkey smash: Use ground turkey with a little olive oil mixed in, and cook it a minute longer per side until it reaches 165 degrees Fahrenheit.
What to Serve With It
Smash burgers are made for french fries, onion rings, and coleslaw. A dill pickle spear on the side is almost mandatory, and a cold soda or iced tea is the classic drink. For a cookout, set out a topping bar with lettuce, tomato, onion, pickles, cheese, and several sauces so everyone can build their ideal burger. A simple green salad keeps the meal lighter if you skip the fries.
Storage and Reheating
Cooked smash patties keep in an airtight container in the refrigerator for up to 3 days. Reheat them in a hot skillet for 1 to 2 minutes per side, or in a 350 degree Fahrenheit oven for 5 minutes. The crispy edges will soften a little on reheating, but the flavor stays great. Raw beef balls can be shaped and refrigerated for up to 1 day, or frozen for up to 3 months; thaw frozen beef in the refrigerator overnight before smashing. Do not store assembled burgers, or the buns will go soggy.
Frequently Asked Questions
What is the best beef for smash burgers?
80/20 ground beef, which is 80 percent lean and 20 percent fat, is the standard. The fat keeps the thin patty juicy and helps the edges crisp. Leaner beef dries out quickly when smashed thin, so avoid 90/10 or leaner for this recipe.
Do I need a cast iron skillet?
Cast iron is ideal because it holds heat well, but any heavy stainless steel skillet works. Avoid nonstick pans, which cannot safely reach the high heat a smash burger needs and will not produce the same deep browning.
Why are my smash burger edges not crispy?
Usually the pan was not hot enough, the beef was too lean, or the patty was smashed too thick. Let the pan heat for a full 3 to 4 minutes, use 80/20 beef, and smash the patties to about 1/4 inch thick. Do not move them while they sear.
Can I smash burgers on a grill?
Yes, if you use a flat griddle or a cast iron griddle pan on the grill. Smashing directly on grill grates does not work, because the meat falls through. A flat surface is essential for the smash technique.
How do I keep the patty from sticking to the spatula?
Place a small square of parchment paper between the spatula and the meat when you smash. Peel it off after pressing. The paper prevents sticking and helps you press evenly.
Can I make smash burgers ahead of time?
You can shape the beef balls up to a day ahead and keep them covered in the refrigerator. Cook them just before serving, because a smash burger is at its best in the first few minutes after it leaves the pan.